g189583
Figure 65
1.
Engine mount
4.
Flange locknuts (5/16
inch)
2.
Bolt—shown for clarity; do
not remove
5.
Front of the machine
3.
Mounting tabs
(undercarriage shroud)
3.
Move the mounting tabs off the bolts that secure
the undercarriage shroud to the engine-mount
brackets.
4.
Remove the undercarriage shroud from the
machine (
and
).
Installing the Undercarriage
Shroud
1.
Align the undercarriage shroud to the bottom
chassis of the machine; refer to
in
Removing the Undercarriage Shroud (page 51)
.
2.
Move the mounting tabs of the undercarriage
shroud over the bolts and carriage bolt at the
engine-mount brackets of the machine; refer
to
in
.
3.
Assemble the undercarriage shroud to the
engine-mount brackets and bolts (
) with the 4 flange locknuts (5/16 inch)
that you removed in step
of
Undercarriage Shroud (page 51)
.
4.
Align the holes in the rear part of the
undercarriage shroud with the holes in the
chassis; refer to
in
Undercarriage Shroud (page 51)
.
5.
Assemble the rear part of the undercarriage
shroud to the chassis (
) with the
5 flange-head bolts (5/16 x 7/8 inch) and 5
washers (5/16 inch) that you removed in step
of
Removing the Undercarriage Shroud (page
.
6.
Torque the nuts and bolts to 1129 to 1582 N∙cm
(100 to 140 in-lb).
Removing the Seat-Base-Access
Panel
1.
Remove the 2 flanged-head bolts that secure
the seat-base-access panel to the seat base
(
).
g032998
Figure 66
1.
Seat-base-access panel
3.
Hole (seat base)
2.
Flanged-head bolt
2.
Remove the seat-base-access panel from the
machine (
).
Installing the Seat-Base-Access
Panel
1.
Align the holes in the seat-base-access panel
with the holes in the seat base (
2.
Assemble the seat-base-access panel to the
seat base with the 2 flanged-head bolts (
) that you removed in step
of
Seat-Base-Access Panel (page 52)
.
3.
Torque the bolts to 1975 to 2542 N∙cm (175 to
225 in-lb).
52
