Gearbox
g315870
Figure 142
1.
PTO guard
6.
Cap screw (4 each)
11.
Pulley
2.
Spacer (2 each)
7.
Gearbox bracket – right
12.
Gearbox bracket – left
3.
Shoulder screw (2 each)
8.
Gearbox
13.
Cap screw (4 each)
4.
Dipstick/breather
9.
Square key
5.
Copper washer
10.
Set screw (2 each)
Removing the Gearbox
WARNING
Do not start the engine and engage the PTO switch when the PTO
shaft is disconnected from the cutting unit. If you start the engine
and the PTO shaft is allowed to rotate, serious personal injury and
machine damage could result.
If the PTO shaft is disconnected from the cutting unit, disconnect
the PTO electric clutch electrical connector.
Refer to
for this procedure.
1. Remove the cutting unit from the machine; refer to the cutting unit
Operator’s
Manual
.
2. Remove the belt covers from the cutting unit.
Groundsmaster
®
3200, 3300 and 3310
Page 8–17
Cutting Units: Service and Repairs
19240SL Rev A
Summary of Contents for Groundmaster 31900
