Wheel Motor Service
g186199
Figure 60
1.
Dirt and water seal
9.
Thrust bearing
17.
Commutator ring
2.
Outer bearing
10.
Coupling shaft
18.
Manifold
3.
Housing
11.
Thrust bearing
19.
Stator
4.
Back-up ring
12.
Drive link
20.
Vane (7 each)
5.
Back-up washer
13.
Bolt (7 each)
21.
Wear plate
6.
Shaft seal
14.
End cover
22.
Rotor
7.
Inner bearing
15.
Body seal (5 each)
23.
Commutator ring
8.
Thrust washer (2 each)
16.
Commutator
The wheel motors used on Groundsmaster 3200/3300/3310 machines are
Parker Torqmotor™ motors of the same basic design with minor differences. The
front wheel motors are TG series motors, and the rear wheel motors are TL
series motors. The motor displacements vary between models. The right side
wheel motors have a reverse timed manifold to allow correct rotation direction for
forward and reverse. The left side wheel motors are identified with a yellow dot
on the motor housing near the B port.
For the wheel motor repair procedures; refer to the
Procedure (TF, TG, TH, and TL Series)
Hydraulic System: Service and Repairs
Page 5–86
Groundsmaster
®
3200, 3300 and 3310
19240SL Rev A
Summary of Contents for Groundmaster 31900
