Operator’s Console
g304808
Figure 123
(models 31900 and 31901 shown)
1.
Swell latch (2 each)
4.
Screw
7.
Nut
2.
Access cover
5.
Cover – right side
3.
Cap screw (10 each)
6.
Cover – left side
Removing and Installing the Operator’s Console Covers
Refer to
for this procedure.
1. Park the machine on a level surface, lower the cutting unit (or attachment),
engage the parking brake, set the key switch to the O
FF
position and remove
the key from the key switch.
2. Remove the access panel from the right side of the operator’s console.
3. Remove the long screw at the front of the console near the TDM
display/controller screen (item 4).
4. Remove the remaining fasteners and the console covers if necessary.
5. Install the console covers in the reverse order.
Groundsmaster
®
3200, 3300 and 3310
Page 7–23
Chassis: Service and Repairs
19240SL Rev A
Summary of Contents for Groundmaster 31900
