Service and Repairs
Wheels
g302853
Figure 111
1.
Front wheel and tire – all models
4.
Rear wheel and tire – 2WD models
7.
Cap
2.
Lug nut (as required)
5.
Flat washer
8.
Cap screw
3.
Rear wheel and tire – 4WD models
6.
Washer
Removing and Installing the Wheels
1. Park the machine on a level surface, lower the cutting unit (or attachment),
set the key switch to the O
FF
position and remove the key from the key switch.
2. Loosen, but do not remove the fasteners (lug nuts or cap screws) that secure
the wheel being removed to the machine.
IMPORTANT
Before lifting the machine with a jack, review and follow
Instructions (page 1–6)
.
3. Raise the machine until the wheel to be removed is off the ground. Support
the machine with appropriate jack stands.
4. Remove the fasteners that secure the wheel being removed to the machine,
and remove the wheel.
5. Fit the wheel to the machine and install the fasteners (lug nuts or cap screws)
snugly.
6. Remove the jack stands and lower the machine to the ground.
Groundsmaster
®
3200, 3300 and 3310
Page 7–5
Chassis: Service and Repairs
19240SL Rev A
Summary of Contents for Groundmaster 31900
