Starting Problems
Problem
Possible Cause
Corrective Action
The battery is discharged.
Charge and test the battery or replace
if necessary.
The battery cables are loose, corroded,
or damaged.
Clean the battery terminals (posts).
Clean the terminals at the ends of the
battery cables.
Inspect the battery cables and repair or
replace them if necessary.
The fuse FB1-F1 (15 A) is damaged.
Test the fuse and replace if necessary.
The fusible link harness at the engine
starter motor is damaged.
Test the fusible link harness and
replace if necessary.
The start interlock relay is damaged.
Test the start interlock relay and replace
if necessary.
The key switch is damaged.
Test the key switch and replace if
necessary.
The starter solenoid is damaged.
Test the starter solenoid and replace if
necessary.
The TDM display/controller is damaged.
Check the TDM display/controller
Diagnostics>Engine>Outputs – OK
Run.
Check the TDM display/controller and
wire harness connector for corrosion
or damaged pins.
Reprogram or replace the TDM
display/controller; contact an
Authorized Toro Distributor for
assistance.
Engine ECU is damaged (models
31902 and 31903).
Check the engine ECU and wire
harness connector for corrosion or
damaged pins.
Nothing happens when you attempt to
start the engine.
Reprogram or replace the Engine ECU;
contact an Authorized Toro Distributor
for assistance.
The battery is discharged.
Charge and test the battery or replace
if necessary.
The battery cables are loose, corroded,
or damaged.
Clean the battery terminals (posts).
Clean the terminals at the ends of the
battery cables.
Inspect the battery cables and repair or
replace them if necessary.
The starter solenoid or starter motor is
damaged.
Test the starter solenoid and starter
motor and replace if necessary.
The starter solenoid “Clicks”, but the
engine does not crank.
The starter mounting bolts are loose or
corroded (insufficient ground).
Remove, clean, apply medium strength
thread locking compound and install
the mounting bolts. Tighten the bolts to
the specified torque.
Troubleshooting: Starting Problems
Page 3–22
Groundsmaster
®
3200, 3300 and 3310
19240SL Rev A
Summary of Contents for Groundmaster 31900
