Removing the Transmission (continued)
g241039
Figure 34
1.
Hex nut
6.
Flat washer (10 each)
11.
Retaining ring
2.
Spacer
7.
Locknut (5 each)
12.
Bolt (3 each)
3.
Compression spring
8.
Idler arm assembly
13.
Bolt
4.
Tension rod
9.
Spacer
14.
Locknut
5.
Bolt
10.
Pivot bushing
15.
Flat washer
14. Remove the bolt, flat washers, and locknut that secure the idler arm to the
transmission mount, and remove the idler arm assembly.
15. Remove the retaining ring from the transmission output shaft.
16. Support the transmission and remove the bolts, flat washers, and locknuts
that secure the transmission to the chassis.
17. Slide the transmission away from the transmission mount until the sprocket
and drive chain are free of the transmission shaft, and remove the
transmission.
18. Remove the transmission drive collar and fan if necessary.
Installing the Transmission
Refer to
for this procedure.
1. If previously removed, apply anti-seize lubricant to the transmission input
shaft and position the fan, key, and transmission drive collar onto the input
shaft (
). Do not tighten the drive collar set screw at this time.
Hydraulic System: Service and Repairs
Page 5–46
GreensPro
™
1240/1260
14211SL Rev A
Summary of Contents for GreensPro 1240
Page 4: ...Reader Comments Page 4 GreensPro 1240 1260 14211SL Rev A...
Page 8: ...Preface Page 8 GreensPro 1240 1260 14211SL Rev A...
Page 14: ...Safety Safety and Instructional Decals Page 1 6 GreensPro 1240 1260 14211SL Rev A...
Page 30: ...Specifications and Maintenance Special Tools Page 2 16 GreensPro 1240 1260 14211SL Rev A...
