Testing the Interlock Module (continued)
4. Check the seat switch, parking brake switch, and neutral switch and their
circuit wiring for proper operation; refer to individual component testing
procedures.
5. Check the Honda electrical components (engine ON/OFF switch, oil
level switch, Oil Alert unit, and ignition module) and their circuit wiring
for proper operation; refer to
Electrical Schematics and Wire Harness
Drawings/Diagrams (page 6–3)
and the
Honda Engine Service Manual
.
6. Check the engine lighting coil output; refer to the
Honda Engine Service
Manual
.
7. If the lighting coil output, all interlock switches, and the Honda electrical
components and their circuit wiring are operating correctly, the interlock
module may be damaged. Replace the interlock module if necessary.
8. After testing, apply a film of dielectric grease to the module terminals and
connect the machine wire harness connector to the interlock module.
Electrical System: Testing the Electrical Components
Page 6–16
GreensPro
™
1240/1260
14211SL Rev A
Summary of Contents for GreensPro 1240
Page 4: ...Reader Comments Page 4 GreensPro 1240 1260 14211SL Rev A...
Page 8: ...Preface Page 8 GreensPro 1240 1260 14211SL Rev A...
Page 14: ...Safety Safety and Instructional Decals Page 1 6 GreensPro 1240 1260 14211SL Rev A...
Page 30: ...Specifications and Maintenance Special Tools Page 2 16 GreensPro 1240 1260 14211SL Rev A...
