Testing the Electrical Components
Some of the electrical system components used on GreensPro machines
are part of the Honda engine. These components include the engine
O
N
/O
FF
switch, ignition module, lighting coil, Oil Alert™ unit, and oil level
switch. Service information for these components can be found in the
Honda
Engine Service Manual
. Contact your local Honda Engine Dealer or visit
for assistance.
The following are testing procedures for the remainder of the electrical system
components used on GreensPro machines. The components include the hour
meter, worklight switch, and on machines above serial number 315000000, a
seat switch, neutral switch, parking brake switch, resistor assembly, and interlock
module.
Note:
For accurate resistance and/or continuity checks, electrically disconnect
the component being tested from the circuit (e.g., unplug the seat switch
connector before doing a continuity check of the switch).
Electrical System: Testing the Electrical Components
Page 6–14
GreensPro
™
1240/1260
14211SL Rev A
Summary of Contents for GreensPro 1240
Page 4: ...Reader Comments Page 4 GreensPro 1240 1260 14211SL Rev A...
Page 8: ...Preface Page 8 GreensPro 1240 1260 14211SL Rev A...
Page 14: ...Safety Safety and Instructional Decals Page 1 6 GreensPro 1240 1260 14211SL Rev A...
Page 30: ...Specifications and Maintenance Special Tools Page 2 16 GreensPro 1240 1260 14211SL Rev A...
