background image

109 

 
 

 

Addendum 

Important Safety Notices and Warnings 

Global Positioning System 

The Global Positioning System (GPS) is a satellite-based system that provides location and timing 
information around the globe. GPS is operated and controlled under the sole responsibility of the 
Government of the United States of America which is responsible for its availability and accuracy. 
Any changes in GPS availability and accuracy, or in environmental conditions, may impact the 
operation of your TomTom device. TomTom does not accept any liability for the availability and 
accuracy of GPS. 

Use with Care 

Use of a TomTom device for navigation still means that you need to drive with due care and 
attention. 

Aircraft and Hospitals 

Use of devices with an antenna is prohibited on most aircraft, in many hospitals and in many other 
locations. A TomTom device must not be used in these environments. 

Battery 

This product uses a Lithium-Ion battery.  

Do not use it in a humid, wet and/or corrosive environment. Do not put, store or leave your 
product in or near a heat source, in a high temperature location, in strong direct sunlight, in a 
microwave oven or in a pressurised container, and do not expose it to temperatures over 60°C 
(140°F). Failure to follow these guidelines may cause the battery to leak acid, become hot, explode 
or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the 
battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and 
seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, 
charging will not occur at low (below 0°C/32°F) or high (over 45°C/113°F) temperatures. 

Temperatures: Standard operation: -0°C (32°F) to +45°C (113°F); short period storage: -20°C (-4°F) 
to + 60°C (140°F); long period storage: -20°C (-4°F) to +25°C (77°F). 

Caution: risk of explosion if battery is replaced by an incorrect type.

 

Do not remove or attempt to remove the non-user-replaceable battery. If you have a problem with 
the battery, please contact TomTom customer support. 

Summary of Contents for Blue&Me-TomTom 2 LIVE

















































































































Reviews: