TomTom Blue&Me-TomTom 2 LIVE, Reference Manual

Page: 10 / 112

10
Important : You should plug the USB cable directly into a USB port on your computer and not into
a USB hub or USB port on a keyboard or monitor.
Once the MyTomTom support application is installed, you can access MyTomTom from the
notification area on your desktop.
Tip: When you connect your navigation device to your computer, MyTomTom tells you if there
are any updates for your device.
Device not starting
In rare cases, your Blue&Me TomTom 2 LIVE navigation device may not start correctly or may stop
responding to your taps.
First, check that the battery is charged. To charge the battery, connect your device to the car
charger. It can take up to 2 hours to fully charge the battery.
If this does not solve the problem, you can reset the device. To do this, press and hold the On/Off
button for 15 seconds and release the button when your device begins to restart.
Charging your device
The battery in your Blue&Me TomTom 2 LIVE navigation device charges when you connect it to
the dock or to your computer.
The light on the On/Off button is orange while the battery is charging and is green when the
battery is fully charged.
Important : You should plug the USB connector directly into a USB port on your computer and not
into a USB hub or USB port on a keyboard or monitor.
Safety Notice
Your Blue&Me TomTom 2 LIVE device contains a GSM/GPRS module which can interfere with
electrical devices such as cardiac pacemakers, hearing aids and aviation equipment.
Interference with these devices may endanger the health or life of you or others.
Do not use it near unprotected electrical units or in areas where the use of mobile telephones is
prohibited, such as hospitals and airplanes.
Take care of your navigation device
Never leave your Blue&Me TomTom 2 LIVE or accessories on view when you leave the car as they
may become an easy target for thieves.