Tomberlin VANISH Operator'S Manual Download Page 98

Page: 98 / 142

Page 98

VANISH Operator’s Manual

BATTERY CHARGER SAFETY INSTRUCTIONS

WARNING:

Use charger only with an algorithm

selected that is appropriate to the specific battery

type. Other usage may cause personal injury

and damage. Lead acid batteries may generate

explosive hydrogen gas during normal operation.

Keep sparks, flames, and smoking materials away

from batteries. Provide adequate ventilation during

charging. Never charge a frozen battery. Study all

battery manufactures’s specific precautions, ie.

maximum charge rates and if cell caps should be

removed while charging.

DANGER:

Risk of electric shock. Connect

charger power cord to an outlet that has been

properly installed and grounded in accordance

with all local codes and ordinances. A grounded

outlet is required to reduce risk of electrical

shock - do not use ground adapters or modify

plug. Do not touch uninsulated portion of output

connector or uninsulated battery terminals.

Disconnect AC supply before making or breaking

the connections to the battery. Do not open or

disassemble charger. Do not operate this charger

if the AC supply cord is damaged or if the charger

has received a sharp blow, been dropped, or

otherwise damged in any way - refer all repair

work to the manufacturer, or qualified personnel.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilites, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

Summary of Contents for VANISH















































































































































Search results

Summary of Contents for VANISH

Reviews:

Brands by name

Popular brands

Tomberlin VANISH, Operator'S Manual

Search results

Summary of Contents for VANISH

Reviews:

Brands by name

Popular brands