Tomberlin VANISH, Operator'S Manual

Page: 101 / 142

VANISH Operator’s Manual Page 101
ALGORITHMS
CHECK DEFAULT CHARGE ALGORITHM
Enter Algorithm Display Mode:
Disconnect AC Power. 1.
Remove positive lead from battery pack. 2.
Apply AC Power and the charger will display the 3.
algorithm number after the Power On Self Test:
All algorithms will display as a series of flashes of the
4.
80% LED.
Algorithms #1-6 will also be indicated by the Ammeter
5.
LEOs.
Algorithm number display repeats for 11 seconds, the
6.
Algorithm Display Mode ends.
Remove AC Power and reconnect positive lead.
7.
CHANGE DEFAULT CHARGE ALGORITHM
Enter Algorithm Display Mode (as above). 1.
While Algorithm Number is displayed (for 11 seconds), 2.
touch positive lead to the battery pack positive terminal
for 3.0 seconds (+/-O. 5s).
Remove lead from battery pack, Algorithm Number will
3.
increment.
To increment the Algorithm Number again, repeat
4.
Steps 2 and 3 within 30 seconds.
Touch positive lead to positive terminal and hold until
5.
relay clicks (>10 seconds). The new default algorithm
is now stored.
Remove AC Power and check default algorithm (as
6.
above).