manualshive.com logo in svg

Tomberlin VANISH, Operator'S Manual

Share
Download
Tomberlin VANISH Operator'S Manual Download Page 43

VANISH Operator’s Manual  

Page 43

BATTERY CHARGING WARNING

Explosive gases are released when batteries are 

* 

charged. Keep sparks, flames and cigarettes away. Shield 

eyes when working near batteries.

Do not charge batteries in a non-ventilated enclosed 

* 

area or near flammable materials.

Do not attempt to charge frozen, leaking, or damaged 

* 

batteries.

Connect battery charger to properly rated electrical 

* 

receptacle with GFCI.

Do not charge with storage or weather cover on vehicle 

* 

or with the cab enclosure doors closed, as fire and 

explosion are possible.

Refer to Owner’s Manual or contact your local Tomberlin 

* 

dealer with any questions.

BATTERY CAUTION

Batteries require regular maintenance.

* 

Failure to maintain batteries in accordance with the 

* 

owner’s manual can result in battery damage, vehicle 

malfunction, fire and/or severe injury or death.

 

Summary of Contents for VANISH















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands