manualshive.com logo in svg

Tomberlin VANISH, Operator'S Manual

Share
Download
Tomberlin VANISH Operator'S Manual Download Page 62

Page 62   

 

VANISH Operator’s Manual

HEADLIGHTS  

This VANISH is equipped with headlights that have high and 

low beam settings. The lights will not function unless the key is 

on. The Headlight ON/OFF Switch is located right of the LCD 

digital speedometer.

To turn lights on:

Turn the key to the ON position.

1. 

Depress shining bulb side of the headlight switch (the 

2. 

upper side of the Headlight ON/OFF switch).
Select High / Low beam by pressing toggle switch on 

3. 

left of the LCD digital speedometer.
When high beam is active, operator can press low beam 

• 

momentarily to flash low beam. This can be useful for 

signaling or getting attention. 

 

 

There are also illuminated indicators on the LCD digital gauge. 

Green = normal beams, Blue = high beams.

 

High Beam for brighter light

 

 

 

Low Beam for normal light

Summary of Contents for VANISH















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands