For Sales and Support, Contact Walker EMD • Toll-free: (800) 876-4444 • Tel: (203) 426-7700 • Fax: (203) 426-7800 • www.walkeremd.com
INTERFACE CABLES
Standard motor power and encoder feedback cables, as well as
communications cables, are available to complete the motion
control system and provide reliable, trouble free start-up. For a
description of optional equipment, refer to Appendix A: Options
and Accessories.
Axiom Plus System Features
Sequential Motion Control - An easy to use sequential motion
control programming environment.
PLC Programming - Provides a method to create more complex
motion control programs than can be done with a sequential
controller alone.
State-of-the-Art Space Vector Commutation - Provides 12.5% better
bus voltage utilization than traditional sinusoidal commutation
drives.
State-of-the-art Flux Vector Motor Current Control - Allows higher
bandwidth control of torque producing current than traditional
Sinusoidal approach. Flux Vector control also improves overall
efficiency by reducing harmonic currents in motor windings. Flux
Vector control is also known as field-oriented control.
High Performance Digital Signal Processor (DSP) Technology -
Allows for the implementation of advanced brushless motor control
algorithms.
Digital Current, Velocity and Position Calculations - Provide for high
bandwidth motor control while minimizing drift and aging
problems inherent in traditional analog drives.
Standard Features:
• 15 optically isolated inputs with 5-25 Vdc range (if analog is not used)
• 8 optically isolated outputs with 5-25 Vdc range
•
One 14-bit analog input (±10Vac)-full differential – 12 optically
isolated inputs with 5-25Vdc range
•
Built-in 24Vdc 400mA power supply
xiv