10-4
Rigging
r/min
TLDI 115A 2007
Ø
13.0 mm hole
(0.51 in)
Vertical center line of boat transom
163.5 mm
(6.44 in)
48 mm
(1.89 in)
48 mm
(1.89 in)
203 mm
(7.992 in)
125.5 mm
(4.94 in)
125.5 mm
(4.94 in)
163.5 mm
(6.44 in)
Outboar
d Motor Installation
T
emplate
Upper edge of transom
When secur
ing an outboard motor on
the tr
ansom, upper installation bolts with
w
asher should be r
un from inside of the
hull to outside
, and lo
w
er installation
bolts should be r
un from outside of the
hull to inside
, and the bolts are to be
tightened using a w
asher and n
ut.
After
installing an outboard motor
, chec
k the
installation f
or w
ater-tightness and that
the outboard is fix
ed on the tr
ansom
securely
.
Installation of an outboard motor
improper
ly bolted on the tr
ansom can
cause damages to the hull, submersion
of the machine
, and/or injur
y to the
cre
w(s) and passenger(s).
W
ARNING
Do not dr
ill upper mounding holes on the area of the
tr
ansom belo
w 25.4 mm (1 in) or lo
w
er from the top edge
of the tr
ansom.
W
ARNING
Transom Dimensions and Drilling Template (An example)
* Full scale transom dimensions and drilling template is shown at the end of this manual.
MD115A̲ch10̲E̲2校̲070605.qxd 07.6.6 7:03 PM ページ 4
