9
9-45
TLDI 115A 2007
Key switch
ResetProcedureChart
ON
1
1
12
2
3
4
5
OFF
Stop switch
Beeping stops
ON
OFF
Disconect the stop switch
lock.
4
Pull the red knob for 0.5
seconds and release.
Confirm advancer
arm is at the fully
closed position
5
Three short beeps
indicate successful TPS
and ECU reset Procedure.
1
second
5
seconds
5
-
10
seconds
5-10
seconds
3
Wait another 5 to 10 seconds, again pull the red knob on the
stop switch for about 0.5 seconds, then release the switch.
4
Resetting of TPS and ECU is completed when the buzzer "Beeps" three
times approximately 5 seconds after the knob of stop switch is returned to
original position.
5
Next, set the key switch to the Off position, comfirm that the
throttle (advancer arm) is at the fully closed position, then turn
the key switch to the On position.
5
-
10
Seconds
0.5
Seconds
5
Seconds
Beep
！
！
Beep
！
！
Beep
！
！
ON
OFF
MD115A̲09̲2校̲070604.qxd 07.6.6 7:01 PM ページ 45
