7-17
TLDI 115A 2007
7
1
2
3
4
6) Disassembly of Drive Shaft Housing
1.
Remove bolts that secure engine base to drive shaft
housing.
Remove M6 installation bolt located in the area
shown by the arrow.
2.
Tap lightly with a plastic hammer to separate engine base
from the housing if it is seized.
3.
When removing drive shaft housing
3
, be careful not to
lose dowel pin
4
for locating engine base
2
.
2
3
4
If necessary, use a bladed screw driver to pry
the engine base taking care not to scratch
mating surface.
MD115A̲ch07̲E̲2校̲070604.qxd 07.6.7 11:09 AM ページ 17
