4
4-29
TLDI 115A 2007
7) Assembly of Vapor Separator Ass'y
1.
Reverse the removing steps.
1
Vapor Separator Ass'y
2
Tighten bolts.
1
2
Bolts
2
:
6 N·m (4 lb·ft) [0.6 kgf·m]
8) Removing FFP* Ass'y
* FFP : Fuel Feed Pump
1.
Remove parts in the order described below.
Disconnect FFP connector 1, loosen hose joint
2
, and
then remove fuel hose ass'y.
2.
Remove following hoses.
Fuel Return Hose
3
: Air Rail
→
FFP
Vapor Return Hose
4
: FFP
→
Vapor Separator
Fuel Hose
5
: Vapor Separator
→
FFP
3.
Loosen two bolts
6
and remove FFP.
Use rag to catch fuel that spills from each hose
when it is disconnected.
9) Disassembly and Inspection of FFP
1.
Loosen upper case
1
securing bolts and take out FFP
from FFP case
2
.
2.
Inspection of FFP
Check if any contamination is found in the case
2
.
Clean if necessary.
3.
Check if any corrosion found on the FFP body
3
, or upper
or lower resin part is damaged or cracked, and clean or
replace if necessary.
1
3
2
1
2
3
4
6
5
MD115A̲ch04̲E̲2校̲070605.qxd 07.6.6 5:42 PM ページ 29
