TNI 20s Manual Download Page 54

Page: 54 / 61

Operating Instructions TNI

20s oxy Version 2.7

Version 1.6.3 July 2010

9 Service/Maintenance

The TNI

device is designed using state-of-the-art and innovative

technology and requires only a minimum of maintenance work.

For the lasting and safe operation of the TNI

device, the instructions

on safety and hygiene must be observed.

It is also good practice to visually check TNI

device for any obvious

damage and to carry out a function test before starting therapy.

If any damage or malfunctions are discovered, immediately contact

the Service Center.

Conducting routine maintenance checks every 2 years after putting

the unit into use helps ensure the user’s and the patient‘s safety and

maintain the quality of the TNI

device.

9 Service/Maintenance

- The care of the TNI

device lies within

the user’s responsibility.

- Repairs/service work may only be carried

out by service technicians authorized by

TNI medical AG.

- Only authorized persons are allowed

to open the device housing of the TNI

device. Excepted are those device parts

which can be disassembled without tools

for the application or cleaning. The power

cable must be removed from the outlet

before opening the unit.

CAUTION!

TNI medical AG

Hofmannstraße 8

97084 Würzburg/Germany

Phone: +49 931 207929 02

Fax : +49 931 207929 01

E-mail: [email protected]

Summary of Contents for 20s






























































Search results

Summary of Contents for 20s

Reviews:

Related manuals for 20s

Brands by name

Popular brands

TNI 20s, Manual

Search results

Summary of Contents for 20s

Reviews:

Related manuals for 20s

Brands by name

Popular brands