TNI 20s Manual Download Page 27

Page: 27 / 61

Operating Instructions TNI

20s oxy Version 2.7

Version 1.6.3 July 2010

4.9 Starting therapy

- Before starting therapy, check that all

components at the connection unit and

the humidifier unit are properly inserted

and connected (housing lid, humidifier

cover, separator panels, water reservoir,

connecting hose, sensor cable, power

cable, applicator etc.)!

The water reservoir must be filled before

the unit is switched on!

4 Startup

If the master switch on the back of the humidifier unit is in the “0“

position, switch it to the “1“ position.

If the unit is in standby mode (the display shows “Standby“), press

the standby button on the front of the humidifier unit.

After a self-test, the device is in operating mode. The display

illumination is activated when the operating elements are operated

in operating mode.

Master switch

Humidifier unit

TNI

20s oxy/

back view

CAUTION!

Once the system has been properly

installed, a greeting showing the current

version of the unit will appear.

The default display will appear subsequently, indicating that the

system is operational.

To change languages, please follow the instructions in Chapter 5.3

Setting the Language.

The following display messages will be shown in the operating

mode:

→

Good Morning

1.5/1.6.3/1.47

Summary of Contents for 20s






























































Search results

Summary of Contents for 20s

Reviews:

Related manuals for 20s

Brands by name

Popular brands

TNI 20s, Manual

Search results

Summary of Contents for 20s

Reviews:

Related manuals for 20s

Brands by name

Popular brands