Operating instructions
As of 06/13
45
Plug a TLS VGA connection cable (male/male) into the VGA
input provided
VGA IN
(Sketch 2) of the first module.
Now connect the other side of the VGA connection cable with
the VGA output
VGA OUT
(Sketch 2) of the second module.
Now connect all other modules in the same order, in which
each output of a module has to be connected to the input of the
next module.
C 10.2 Audio-Anschluss
Plug a TLS Audio connection cable (male/male) into the Audio
input provided (
BUS IN
) (Sketch 2) to the right of the dip switch
of the first module.
Now connect the other side of the Audio connection cable with
the Audio output
BUS OUT
(Sketch 2) to the left of the dip
switch of the second module.
Now connect all other modules in the same order, in which
each output of a module has to be connected to the input of the
next module.
Warning!
Connect the modul
e’s power supplies only to the power
socket, when having interconnected the modules first! Switch on the
devices / system / room only after that.
Now proceed as described under
C 5 Initial operation.
