Operating instructions
42
As of 06/13
Enable Master Audio AD
This operation mode is selected to interconnect all audio inputs at the
last device of a
QuickScout AD XL
system and to distribute point
Bus OUT of the VGA side. Thereby you need only one audio line to
the amplifier/display device. By pressing a select button now the
relevant audio is distributed.
C 6 Operation
C 6.1 Switching on the system
The switching on of the system is carried out
– depending on the
configuration done
– by pressing any Select button, an external
button or a key switch at
TLS QuickScout A/D XL
. Hereupon the
display device gets switched on and the adequate signal input gets
selected. Please note that the display device does need some time
for the system start. During the starting procedure the yellow Info-
LED flashes.
It is recommended to combine this function with the activated signal
detection of the
TLS QuickScout A/D XL.
With it a key stroke will
only cause a switch on of the system, when there is effectively a
video signal. An accidentally switch on of the system, e. g. by
cleaning work, is thus prevented.
C 6.2 Signal detection / Selecting the connected notebooks
The
TLS QuickScout A/D XL
does
recognise, whether there is a
VGA or HDMI signal at the respective input. This is signalised by the
green
lighting of the signal-LED next to the respective buttons HDMI
1-2 and VGA 1-2. If the signal-LED flashes, there is a weak VGA-
signal.
By pressing a select button the relevant source is selected and the
respective presentation is displayed on the common display device
(e. g. plasma, LCD screen or DV projector).
This is signalised by the
red
lighting of the corresponding
Select
LED.
