Operating instructions
32
As of 06/13
You can get the key switch from
TLS
under
Ident. No 8639358
and
under
Ident. No. 8639682
.
Don´t use external inputs to switch ON / OFF the system
This operation mode turns off the use of the input function of the I/O
ports 1 + 2 and enables the operation as an output.
Use the signal identification to switch ON / OFF the system
This operation mode activates the signal detection at all signal inputs.
With it a key stroke will only cause a switching on of the system,
when there is effectively a video signal. An accidentally switch on of
the system, e. g. by cleaning work, is thus prevented.
Use the system select button to switch ON / OFF the system
This operation mode can be activated to allow for an easy switch on
of the system at one of the 4 Select buttons. It is recommended to
combine this function with the activated signal detection of the
TLS
QuickScout A/D XL.
With it a key stroke will only cause a switch on of the system, when
there is effectively a video signal. An accidentally switch on of the
system, e. g. by cleaning work, is thus prevented. (see C 5.2.1.2.3)
System OFF mode enabled
This operation mode enables the switch off of the
TLS QuickScout
A/D XL
by means of the select buttons. A key stroke of 5 s causes
the switch off of the system. Hereupon the projector will be shut down
according to the settings in Projector timings and can be taken off of
the 230V mains by means of the Relay box Greenline at the output
GL. Afterwards the Power save mode will be activated.
