Operating instructions
20
As of 06/13
When using a DVI notebook:
Connect your notebook with a
DVI/HDMI cable to the
TLS QuickScout A/D XL
at the female
connector
HDMI 1
or
HDMI 2
(sketch 1). Connect the audio output
of the DVI notebook with a stereo audio cable to the
TLS
QuickScout A/D XL
at the corresponding female connector
Audio 1
or
Audio 2
(sketch 1, page 9).
When using a VGA notebook:
Connect your notebook with a
VGA cable to the
TLS
QuickScoutAD XL
at the female connector
VGA 1
or
VGA 2
(sketch 1, page 9). Connect the audio output of
the VGA notebook with a stereo audio cable to the
TLS
QuickScout A/D XL
at the corresponding female connector
Audio 1
or
Audio 2
(sketch 1, page 9).
C 5.1 DIP switch
The DIP switches on the front side of the device do
not
have any
function for the operation in practice
– they are used for internal test
functions during production.
This reference does
not
apply to older devices of the TLS
QuickScout system.
C 5.2 Software
The configuration of the
TLS QuickScout A/D XL
can be carried out
with the PC software
TLS QuickScout A/D autoswitch
configuration tool
.
This requires a Windows PC with Windows XP SP3 or Windows7.
Otherwise a terminal program can be applied for configuration, e. g.
Hterm. Hence the configuration of
TLS QuickScout A/D XL
is also
possible with other operation systems.
In both cases a serial connection must be established between the
PC and
TLS QuickScout A/D XL
.
