Operating instructions
As of 06/13
35
Each page has the
Learn
function for teaching infrared codes via
your remote control. For this please click on the
Learn
button and
another window appears:
Press the start button. A timer starts running. You now have 10
seconds to teach the required IR code.
After successful teaching, the IR window contains the IR code in
hex format.
The codes are fully compatible with the Hex Pronto format.
After successful teaching, the tool does report this and the IR code is
transferred to the associated window.
It sometimes may happen, that an IR code has been read incorrectly.
Possible sources of interference are e. g. high ambient brightness,
neon lamps or halogen spot lights.
Thus the test function serves as immediate test of the learned IR
code. Connect an IR emitter to the IR output and attach the emitter
directly on the receiver of the device to be controlled. Press the Test
button and check the proper function of the device to be controlled.
