Operating instructions
As of 06/13
41
C 5.3.4 Audio
In this menu item you configure the audio options of
TLS
QuickScout A/D XL
. You will find the options available here
explained in the category
device settings
of the configuration
software (see C 5.2.1.2.3 Device Settings)
Enable only one audio
In this operation mode only the audio inputs VGA-Audio 1 and VGA-
Audio 2 are active and distributed at the point Bus OUT of the VGA
side. When pressing key 1 (HDMI 1 or VGA 1), the audio will be
conducted from input VGA-Audio 1 to the output. When pressing key
2 (HDMI 2 or VGA 2) the audio will be conducted from input VGA-
Audio 2 to the output.
Enable Master Audio
In this operation mode all audio inputs get connected and distributed
at the end of the system at the point Bus OUT of the VGA side.
Thereby you need only one audio line to the amplifier/display device.
By pressing a select button now the relevant audio is distributed. You
select this operation mode at
a device placed “in the middle” of a
TLS
QuickScout AD XL
system.
