Operating instructions
12
As of 06/13
Connect the module power supply to the power socket, only after
having connected the display device and the audio playback device
to the
TLS QuickScout A/D XL
. Only now switch on the devices /
systems / room.
C 4.3. Connecting display device and audio playback device
The
TLS QuickScout A/D XL
connects analogue and digital sources
via an analogue (VGA) and a digital (DVI) cable run to the display
device.
Digital
:
If the connection on the display device and on all sources connected
to the system are
HDMI
,
the audio signal will be transmitted via the
DVI/HDMI bus. No additional audio cable is needed.
If additional DVI sources resp. a DVI display device is used,
additional audio cable is needed.
For an optimal image and audio quality we recommend you to use
the
TLS DVI cable
(
Ident. No.: 8633000
)
as well as the
TLS audio
cable
(
Ident. No.: 8365599
) for
TLS QuickScout A/D XL
.
If
DVI
devices are used, connect the
TLS QuickScout A/D XL
with a TLS DVI connection cable via the appropriate DVI output
BUS OUT
(Sketch 2, p. 10, connection 21) with your display
device (e. g. LCD or projector).
with a TLS audio connection cable über via the appropriate
audio output
BUS OUT
(Sketch 2, p. 10, connection 16) with
your audio playback device (e. g. amplifier).
If the connection on the display device and on all sources are HDMI,
you only need to connect the
QuickScout A/D XL
with your display
device via the DVI-HDMI connection cable.
