TIM Mirus MC DES, Additional Information

Page: 116 / 138

7 Alarms and messages
7-24 MIRUS Controller, SW 2.03.02, Additional Information Master (en-GB)
7.4.6 Messages during SW update
Messages generated during the SW update are shown on the screen as follows:
No. Message Set condition Required user
action
Device action
E01 MIRUS Controller
SW update
Software update
card detected.
Press play to start.
SD card with SW
update detected.
Start update
process via play
button or cancel.
Waits for user
action.
E02 Please wait. SD
card is being
checked.
User has started
SW update.
None. Checks SD card.
E03 Applying software
update. Please
wait.
During SW update
screen goes black.
SD card is
checked and valid.
SW version on
card is higher than
on MIRUS
Controller.
Internal battery is
full and
guarantees
successful SW
update in case of
power failure.
None. Performs SW
update.
E04 SW update almost
complete...
Please confirm to
complete
successfully.
Afterwards
remove SD card
and disconnect
device from AC.
SW update
successfully
finished.
Confirm with OK.
Remove SD card
and disconnect
AC. Wait until
MIRUS Controller
has turned off
(Alarm lights off.
Reconnect AC
and restart MIRUS
Controller.
Waits for user
action.
Performs turn OFF
sequence.
MIRUS Controller software update
Software update card detected.
Please press Play to start.
HW 2.n SW 2.03.02