TIM Mirus MC DES, Additional Information

Page: 108 / 138

7 Alarms and messages
7-16 MIRUS Controller, SW 2.03.02, Additional Information Master (en-GB)
No. Message
(in order of
testing)
Set condition Required user
action
Device action
A12 Sorry. A problem
has been
detected. The
device cannot be
operated. To turn
off device please
confirm.
A technical failure
was recognized
during Power up
test.
Confirm to turn off
MIRUS Controller.
Then disconnect
from AC, wait until
Alarm lights are
off, then reconnect
and re-start the
MIRUS Controller.
Contact your
service in case the
MIRUS Controller
will continue to
show this
message.
Performs turn OFF
sequence as soon
as user confirms
message.
A13 Thank you!
Goodbye...
This message is
sent whenever the
system is moved
into off mode.
None. Turn OFF
sequence.
A14 Power up test
successful.
Power up test was
successfully
completed.
None or turn off
MIRUS Controller
via turn off button.
Initialization
sequence for
System test or
performs turn OFF
sequence after
user selection.