63
1
Switch the chosen device (TV, satellite receiver, DVD recorder/player) that you wish to find the code for, to
ON
. When the correct code has been found the device will switch
OFF
.
2
Press and hold down the TV (TV), satellite (SAT) or DVD recorder/player (DVD) button until the red light
stays on, then release the button.
3
Press the power button once and release, this will start the auto search mode.
4
When the device switches
OFF
. Immediately press and release the device button that was initially selected
to save the code in the remote control.
When the red light switches off, all the codes have been tried and the auto search mode has been exited.
To exit the auto search mode before all the codes have been tried, press and release the device button that
was initially selected.
To learn which three digit code has been set to control the device see
Checking/Recalling the Device Code
on page 64.
Auto Search – All Brand Codes
1
Switch the chosen device (TV, satellite receiver, DVD recorder/player) that you wish to find the code for, to
ON
. When the correct code has been found the device will switch
OFF
.
2
Press and hold down the TV (TV), satellite (SAT) or DVD recorder/player (DVD) button until the red light
stays on, then release the button.
3
Press PR+ or PR- once and release. Each time PR+ or PR- is pressed a code is transmitted.
To perform a fast search, press and hold down PR+ or PR- button.
When the device switches
OFF
, release the PR+ or PR- button.
Step 4 must be executed so that the code is saved in the remote control.
4
Press and release the device button that was initially selected to save the code in the remote control.
To learn which three digit code has been set to control the device see
Checking/Recalling the Device Code
on page 64.
Manual Search - All Brand Codes
