10
The Splashproof Remote Control
Before the splashproof remote control can be used the insulating plastic film must be removed
from beneath the battery.
Place the remote control face down on a horizontal flat surface and use the opener to release the
battery compartment cover by rotating it in an anti-clockwise direction. Set the battery cover and
opener to one side.
Rest one finger lightly on the battery and pull the printed tag to ease the insulating film from
underneath the battery. Try to avoid touching the black O-ring as it is coated in light grease.
Replace the battery cover and lock it back in place using the opener.
LiTh
ium
Cell
CR2
032
3V
LiTh
ium
Cell
CR2
032
3V
Remote control with battery cover removed
Replacing the Battery
Place the remote control face down on a horizontal flat surface and use the opener to release the battery
compartment cover by rotating it in an anti-clockwise direction. Set the battery cover and opener to one
side.
Carefully remove the old battery and dispose of it safely.
Observe the polarity.
Do not short circuit the battery.
The battery of remote control shall not be exposed to excessive heat such as
sunshine, fire or the like.
Try to avoid touching the black O-ring as it is coated in light grease.
Insert the new CR2032 battery with the positive (+) side upwards. Replace the battery cover and lock it
back in place using the opener.
