TileVision 22" Manual Download Page 29

Page: 29 / 72

Tuning the TileVision

Satellite

Channel Search Menu.

Press the

buttons to highlight

Scan

Mode.

Press the

buttons to set the scan mode to the required setting.

2a Default

Blind Scan

Network

Press the

buttons to highlight

Crypted

mode.

Press the

buttons to set the Crypted mode to the required setting.

All Channels

FTA (Free To Air) Channels.

Press the

buttons to highlight

Service Type

mode.

Press the

buttons to set the Service Type mode to the required setting.

All

DTV

Radio

Press the

BLUE

button, the Delete Satellite Channels confirmation menu will be displayed.

Press the

button to delete previous satellite channels and start a new scan.

Or press the

EXIT

button to start a new scan in addition to a previously scanned satellite.

Recommended setting for the Channel Search are:

Scan

Mode

Default.

Crypted

All

Channels.

Service

Type

All.

Summary of Contents for 22"









































































Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands

TileVision 22", Manual

Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands