TileVision 22" Manual Download Page 30

Page: 30 / 72

Tuning the TileVision

Satellite (

Transponders

)

All setup values for each satellite must be entered before selecting individual transponders.
Select Satellite source see page 24

Press the

MENU

button. The CHANNEL menu will be displayed.

Press the

buttons to highlight

Dish Setup

Press the OK button to display the Dish Setup menu.

Press the

buttons to highlight the required

satellite

Press the OK button, a RED tick will be placed by the side to indicate the satellite has been selected..

Edit the satellite settings if required. Refer to pages 26 & 27.

Press the (non waterproof remote)

ECO

button (GOTO Transponder). A list of transponders will be

displayed.

Press the

buttons to highlight the required

transponder

Transponder values can be edited. Press the

GREEN

button to display the transponder edit

menu.

Press the

buttons to highlight the required setting.

The values for Frequency & Symbol(Ks/s) is entered using the number buttons on the remote

control.

Press the

buttons to set the value for Polarity.

Press the

button to save settings and exit the transponder edit menu.

Press the

button (a RED tick will be placed by the side) to select the transponder to be scanned.

Repeat instructions 7 & 8 to select the required transponders to be scanned.

Press the BLUE button, the Channel Search menu will be displayed.

Refer to page 27 to set up the Channel Search options.

Summary of Contents for 22"









































































Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands

TileVision 22", Manual

Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands