TileVision 22" Manual Download Page 54

Page: 54 / 72

Sleep Timer

The TileVision

incorporates a sleep timer which can be set to turn the unit off after a preset time. The

available delay times are:

10, 20, 30, 60, 90, 120, 180, and 240 minutes.
The sleep time can be set as follows:

Press the

MENU

button.

Press the

buttons to display the

TIME

menu.

Press the

buttons to highlight the

SLEEP TIMER

menu.

Press the

button to display the SLEEP TIMER menu.

Press the

buttons to select the required delay.

Press the

MENU

button to close the SLEEP TIMER menu.

An on-screen countdown will be displayed from 30 seconds before the TileVision

switches off.

The TileVision

incorporates a auto standby function. If there has been no operation of the TileVision

after a

set time the TileVision

will switch to standby. Time lengths available, OFF, 3 hours, 4 hours or 5 hours.

Press the

MENU

button.

Press the

buttons to display the

TIME

menu.

Press the

buttons to HIGHLIGHT the

AUTO STANDBY

menu.

Press the

button to display the AUTO STANDBY menu.

Press the

buttons to select the required delay., OFF, 3 hours, 4 hours or 5 hours.

Press the

MENU

button to close the AUTO STANDBY menu.

An on-screen countdown will be displayed from 30 seconds before the TileVision

switches off.

Auto Standby

The Sleep Timer can be changed whilst watching a

programme. Press the Sleep button to sequence

through the delay settings.

Summary of Contents for 22"









































































Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands

TileVision 22", Manual

Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands