TileVision 22" Manual Download Page 49

Page: 49 / 72

Four preset sound modes can be selected or, using the User mode, five frequency bands can be set

to preferred levels.

Setting the Sound Mode

Press the

MENU

button.

Press the

buttons to select the

SOUND

menu.

Press the

button to display the

Sound Mode

menu.

Press the

buttons to select any of the different modes as shown below.

Press the

MENU

button to save the settings and close the Sound Mode menu.

Sound Settings

Standard

User

Sports

Movie

Music

Five frequency bands can be adjusted by cutting or boosting the selected frequency. Adjustments can be made

as follows:

Press the

MENU

button.

Press the

buttons to select the

SOUND

menu.

Press the

button to display the

Sound Mode

menu.

Press the

buttons to select

User

in the Sound Mode menu.

Press the

buttons to select a frequency band.

Press the

buttons to adjust the value.

When all the settings are as required press the

MENU

button to save the settings and close the adjustment

dialogue.

Sound - User Mode

Summary of Contents for 22"









































































Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands

TileVision 22", Manual

Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands