39
The EPG Timer Recording
The Electronic Programme Guide is only available when viewing Digital TV or Satellite TV.
To record a program from the EPG.
1
Press the
EPG
button. The EPG will be displayed with the current channel being viewed, highlighted.
2
Press the
5
button to highlight the Date Time Bar (at the top of the EPG listing). For a fast scroll up the
EPG list press the Page Up button.
3
Press the
34
button to set the required date, the date can be set within the next seven days from the
current date.
4
Press the
5
button to highlight Programme Guide Time.
5
Press the
34
buttons to change the Programme Guide Time to Programme Guide Channel.
6
Press the
6
button to highlight Channel Select.
7
Press the
34
buttons to select the required channel.
8
Press the
56
buttons to highlight the required programme and time.
9
Press the
RED
button.
10
The
RECORDER
settings will be displayed.
11
Press the
56
buttons to highlight MODE.
11a Press the
34
buttons to set the required recording sequence.
ONCE.
EVERYDAY.
WEEKLY.
12
When the mode is not set to auto, the START time and END time can be adjusted.
12a Press the
56
buttons to highlight the item to be adjusted.
12b Press the
34
buttons to set the value.
13
When all the information has been entered press the
OK
button.
14
The Timer Confirmed notification will be displayed.
If a programme recording time conflicts with another recording the Timer Confirmation notice will
advise a Timer Overlap and the current setting will be deleted. The timer recording will not be set.
Timer Recording - Indication.
With the TileVision in standby mode (red LED lit). The LED will change to green to indicate
that the recording is in progress, a picture will NOT be displayed. On completion of the
recording the LED will revert back to red.
Manual adjustment of a timer recording.
