TileVision 22" Manual Download Page 28

Page: 28 / 72

Tuning the TileVision

Satellite

Select Satellite source see page 24

Press the

MENU

button. The CHANNEL menu will be displayed.

Press the

buttons to highlight

Dish Setup

Press the

button to display the Dish Setup menu.

Press the

buttons to highlight the required satellite. For UK Free To Air channels, select the satellite

marked Ku_TileVision (No 59).

Press the

button, a RED tick will be placed by the side to indicate the satellite has been selected..

Press the

button to edit the satellite settings menu.

Press the

buttons to highlight the setting to be adjusted.

LNB Type. Press the

button to display the list of available options. Press

buttons

to highlight correct value. Press the

button to set the value.

Recommended

09750/10750

Press the

buttons to set the correct value for:

Recommended

LNB Power

13/18 V

22KHz

Auto

  ToneBurst None
  DiSEqC1.0 None
  DiSEqC1.1 None
  Motor

None

Press the

BLUE

button, the Channel Search menu will be displayed.

Refer to page 27 to set up the Channel Search options.

Summary of Contents for 22"









































































Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands

TileVision 22", Manual

Search results

Summary of Contents for 22"

Reviews:

Related manuals for 22"

Brands by name

Popular brands