THOMSON ST 2030 SIP Administrator'S Manual Download Page 266

Page: 266 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 258 of 308

This feature is always active and does not need any configuration.

Additional Softkey Control

The purpose of this feature is being able to deactivate/activate

“Transfer to

voice mail” and “Pick up” soft keys, to accomodate to environments in which

these features are not supported.

Feature activation

Web GUI and APS can be used to control these features.

In the admin Web GUI, go to Advanced



Call Feature page, 2 new entries

can be found:

“Transfer to voice mail”

corresponding to “TrMail” soft key

“Pick up call on another phone”

corresponding to “PickUp” soft key

You can tick/untick the options to enable/disable the features. They are
enabled by default

As for APS, related parameters are described in next paragraph.

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands