THOMSON ST 2030 SIP Administrator'S Manual Download Page 152

Page: 152 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 144 of 308

ST20XX SIP New Features (SG vx.65.1)

Overview

This document describes a set of features included in ST20xx vx.65.1 in

order to improve their usability in different environments.

Multi-registration on a same server

St20xx is able to support multi-registration on the same server.

Same as before, the main line will be the master.

“

Registered

” status icon will be driven by the main line registration status.

Function key 1 will always be assigned to the main line. Multi registration
can include Main line.

The phone behaviour will be the same for the main line and other registered

lines for all features including register.

The phone supports multi-registration so that each line will register with
server with different credential and extension number.

This document addresses the improvements to be done in ST20xx to

enhance its support for this feature.

Feature Activation

A new parameter is needed to configure this function and with some

additional definitions listed below.

L. Via the web GUI:

An additional ite

m will be created in the roll down “Type” menu:

Multi-

registration.

This roll down type will always be shown.

The function key assigned to multi-registration will have the following

parameters separated by “

” (vertical bar):

- Line number

- Authentication username
- SIP password
- Phone Name (Optional)

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands