THOMSON ST 2030 SIP, Administrator'S Manual

Page: 12 / 316

ST2030s VoIP Business Phone
ST2030s SIP Administrator Guide v3.0
Page 4 of 308
Connecting to the Network and the PC
The SIP Phone has 2 RJ-45 ports that each support 10/100 Mbps full duplex Ethernet connection
to external devices- Network port and access port (one for PC and one for LAN).

Network Port (10/100LAN)
Use the Ethernet cable to connect the LAN port to an Internet equipment, such as a hub, switch.
Or directly to the Network. In Power over Ethernet (PoE) office environment, the IP phone can
be powered from a switch via Ethernet cable, in which case the external power adaptor is not
needed.

Access port (10/100PC)
Use the Ethernet cable to connect a network device, such as a computer to the PC port on the
back of your phone.
Powering up the Phone
The ST2030 could be powered by either a main power unit, or PoE.
Its power consumption is under 6W.

Power Plug
The power plug is fed with 9VDC, 800mA or 12VDC /1000mA liner/switching.
The power plug unit will be adapted specifically to the target country requirements:

EU plug for Europe (ST2030 EU)

« American » plug for US (ST2030 US)

“UK” plug for UK (ST2030 UK)

Power Over Ethernet
The ST 2030 supports PoE as defined by 802.3af Standard
It is class 2, and supports class negociation (in order to plug as many devices as possible on a
PoE hub). It can be powered with PoE up to 100 meters with category 5,5e or 6 cables.
Connected a headset
If you will use a headset, plug the RJ9 headset connector into the headset jack port on the left
side of your IP Phone (see the figure 2.1)
Overview
The SpeedTouch 2030 SIP is a VoIP Phone that can be plugged directly into an IP Network and
used very much like a standard private branch exchange (PBX) telephone. The SpeedTouch 2030
is an IP telephony instrument that can be used in a VoIP environment.
The ST2030 IP phone is compliant with SIP protocol.