THOMSON ST 2030 SIP Administrator'S Manual Download Page 262

Page: 262 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 254 of 308

ST2030 SIP New Features (SG1.52.1)

Overview

This document describes a set of features included in ST2030 SIP v1.52.1 in
order to improve its usability in different environments.

List-oriented BLF

The purpose of this feature is to supervise other phones as is the case of
standard BLF (from now on, referred to as User-Based BLF).

This feature is taylored to Broadworks environments.

The main difference from administrator point of view is the dynamic
provisioning via NOTIFY of all the supervised parties contained in an URI-

List-versus static provisioning for User-Based BLF

Feature activation

In order to have List-oriented BLF active, APS or web gui can be used.
Please note default mode for BLF is User-Based.

A. Via Web GUI:

First you have to decrease Multiline, (or use an extension module) in

Advanced



Advanced

Then go to Advanced



Call feature

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands