THOMSON ST 2030 SIP Administrator'S Manual Download Page 197

Page: 197 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 189 of 308

B) Through APS:

For this purpose, new parameters have been included in the [sip] section of
the Common/MAC config files, to be able to configure the feature.

[sip]

DNDFlg=

DNDOnSC=

*67

DNDOffSC=

*68

C) Through Telnet:

For this purpose, new parameters have been created, described as follow:

sip set

DNDFlg

[local|sc]

sip set

DNDOnSC

(DND on star code)

sip set

DNDOffSC

(DND off star code)

Behavior

Do Not Disturb ON through Soft Key

1. Using the navigation keys, Press DND Soft key.
2. Press Edit - select ON - press OK
3. The phone will send the INVITE with TO header = SC

**Same remark on mmi as above**

Do Not Disturb OFF through Soft Key

1. Using the navigation keys, Press DND Soft key.
2. Press Edit - select OFF - press OK

3. The phone will send the INVITE with TO header = SC
**Same remark on mmi as above**

Transfer to Voicemail Service

Feature Activation

A) Through the WebGui:

The activation of this feature is accessible from the WebGui in the Setup /
Basic Setup / ProfileN section.

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands