THOMSON ST 2030 SIP Administrator'S Manual Download Page 250

Page: 250 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 242 of 308

ST20XX SIP New Features (SG vx.54.2)

Overview

This document describes a set of features included in both ST2030 SIP
v1.54.2 and ST2022 SIP v3.54.2 in order to improve its usability in different

environments.

Automatic Hang Up

This new feature allows the phone to hang up automatically, stopping the

audio output (regardless it‟s from speaker, headset or handset) and turning

the phone into idle state. It can be configured to wait x seconds before the

hang up is done. If the value of x is set to 0, phone understands that this
feature is deactivated.

Obviously this doesn‟t enter in conflict with the signalling since the count of

seconds stars after a BYE is received.

If the phone hangs-up automatically and the handset is not physically on-

hook, on the next incoming call the user must on-hook first then off hook to
answer the call (or press the Answer softkey).

Feature activation

It can be configured via Web GUI with a new parameter sitted on Advanced |

Avanced menu:

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands