THOMSON ST 2030 SIP Administrator'S Manual Download Page 145

Page: 145 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 137 of 308

environment. For more detail, please refer to “

ST20xx SIP New Features SG

vx.62” P.145

Remark:

Now, if the Starcodes are used for self-phone, those will be denoted by SC.
While, if the Starcodes are used for supervised phones, which will be

denoted by SV.

Then, go to Advanced



Call feature; enter the Starcode for

DND On/Off

and

Call Forward

Under the

call forward

sub-menu, enter the starcode for Call-forward OFF

and call-forward Always ON for the couple of activation/deactivation of the

service. x is represented the phone number, which the self-phone forwarded
to.

A new page is added called

Service code

in Advanced -> Service code. All

the Starcode, which are used for monitoring to the supervised phones will be
put there and be denoted by SV.

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands