THOMSON ST 2030 SIP Administrator'S Manual Download Page 173

Page: 173 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 165 of 308

Behavior when an incoming call is received and another one is active:

In the event that additional call arrives when the user is already
engaged in a call, the phone should provide call waiting indicator. Calls

to other lines (than primary line) should be indicated with on-screen
display and Function Keys LEDs, with the same approach as above:

function key led which corresponds to that appearance is the one to be
used.

Main Line can be share or private:

- Phone can have on main private line with Second line: Private Main
line is not Share with any others phones.

- Phone can have on main Share line with Second line: Share Main line
is share with others phones.

Feature Activation

To activate shared call Appearance with Main line private, a new parameter
has created, described as follow:

New Parameter

: SCAMainLinePrivate

Existing Parameter

: SharedCall Appearance

A) Through WebGui:
The activation of this feature is accessible from the web GUI in the Advanced



Call Feature. Then, enable Broadsoft‟s SCA or Broadsoft‟s SCA with SCA

Main Line Private. (Shared Call Appearance is disable by default)

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands