ST2030s VoIP Business Phone
ST2030s SIP Administrator Guide v3.0
Page 170 of 308
Two new parameters have been created to support this new feature:
1.
PBXconfiguration
, to indicate if the phone is behind a PBX or not.
<
Dial-Tone
> will be played first when user goes off hook (as it was already
the case until this version), no matter the value of this parameter. So, if
this parameter is set to 1 (behind PBX), you should modify the <
Dial-Tone
>
table and configure it with your preferred PBX dial-tone.
2.
PBXprefix
, to indicate which is the PBX-prefix to access to the public
network (can be 0 to 9, * or #). If the phone is not behind a PBX (previous
parameter set to 0), this second parameter will not be taken into account.
If the phone is behind a PBX, the behavior of the phone is as follows:
When the user takes the line, <
Dial-Tone
> is generated.
When the user enters the 1
st
digit:
If this (digit = PBXprefix) then <
Dial-Tone2
> is played until another
key is pressed
In any other case, <
Dial-Tone
> is stopped, as current behavior.
Summary of Contents for ST 2030 SIP
