THOMSON ST 2030 SIP Administrator'S Manual Download Page 265

Page: 265 / 316

ST2030s VoIP Business Phone

ST2030s SIP Administrator Guide v3.0

Page 257 of 308

User Class Identifier

User Class identifier is a DHCP option (Opt 77) which allows DHCP servers to

serve different devices differently.
In particular, this option is useful for Provisioning scenarios with more than

one model using a similar strategy for provisioning parameter transport
using options 66/67/150.

ST2030 will send option 77 in all DHCP DISCOVER and DHCP REQUEST
messages.

The content delivered by ST2030 within this option depends on the protocol
loaded.

Hence it will be “Thomson ST2030S” or “Thomson ST2030M”

As an example, this is what would be seen with a packet sniffer with an SG
version

Feature activation

Summary of Contents for ST 2030 SIP





























































































































































































































































































































Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands

THOMSON ST 2030 SIP, Administrator'S Manual

Search results

Summary of Contents for ST 2030 SIP

Reviews:

Related manuals for ST 2030 SIP

Brands by name

Popular brands