If more than one run was specified, the number in the
Run 1 of
field is updated, for example,
Run
2 of
,
Run 3 of
.
Empty the waste bin after the test is complete.
If the test fails, contact Service.
Perform a plate holder test
The plate holder test determines if the instrument holds and senses the OpenArray
™
Plate correctly.
1.
Click
Service
4
Diagnostics
.
2.
Select the
Plate Holder Test
tab.
3.
Select or deselect the checkboxes that correspond with the OpenArray
™
Plate holders to test.
•
OpenArray Plate 1
•
OpenArray Plate 2
•
OpenArray Plate 3
•
OpenArray Plate 4
4.
Enter a number in the
Run 1 of
field.
The number specified in this field is the total number of times that the instrument performs the
plate holder test sequentially.
5.
Click
Start test
.
The status of each task in the plate holder test is displayed.
If more than one run was specified, the number in the
Run 1 of
field is updated, for example,
Run
2 of
,
Run 3 of
.
If the test fails, contact Service.
Perform a loading test
The loading test determines if the instrument performs the tasks associated with loading the
OpenArray
™
Plate correctly.
The test is set up with a quick run workflow (see Chapter 6, “Set up and start the run with the quick run
workflow”).
A sample plate and a waste bin are required.
An OpenArray
™
Plate and at least one tip box are optional.
Place the items that are used during the loading test on the deck.
1.
Click
Service
4
Diagnostics
.
2.
Select the
Loading Test
tab.
Appendix D
Manage the service settings
Perform diagnostics tests
D
QuantStudio
™
12K Flex OpenArray
™
AccuFill
™
System User Guide
81
